Required = Unless stated otherwise, this file must be installed BEFORE the Atheros® AR9285 Wireless Network Adapter Update in order for it to work properly. Download the latest Windows drivers for Atheros AR9285 Wireless Network Adapter Driver. Drivers Update tool checks your computer for old drivers and update it. Qualcomm Atheros ar9285 wireless network. Add new features, or just update to the. For download Atheros AR9485WB-EG Wireless Network Adapter Driver provides. Problem with Atheros AR9285 802.11b/g/n WiFi Adapter. Qualcomm Atheros Wireless >Properties >Driver tab. Driver update like you suggested and.

Built-in drivers/modules, tested only on Intrepid Also works on Karmic - see below If the method described in this section doesn't work for you, try described below. Look for the ath5k module, located in the package.

Install the package using either Synaptic or apt-get, and make sure it is activated on System/Administration/Hardware Drivers. Note: For 9. Jer For Windows 7 32 Bit on this page. 10 substitute linux-backports-modules-karmic, Follow the steps below only if ath5k module did not work. This may be the result of a conflict with either ath_hal or ath_pci, or ath5k might be blacklisted somewhere.

So: 1) Hit 'alt+f2' to run a command and type: gksudo gedit /etc/modprobe.d/blacklist.conf And add the following lines to the bottom of the file: blacklist ath_hal blacklist ath_pci Reboot. If it's still not working than it is very likely you have ath5k being blacklisted somewhere. Blacklisting may have occurred if you are coming from a Hardy upgrade and/or did not uninstall the madwifi driver before doing this. So try the following, but Be Extremely Careful - this next command opens nautilus with root privileges, which can change and/or damage any file on the system. 2) Hit 'alt+f2' to run a command and type: gksudo nautilus And navigate to /etc/modprobe. Homework Manual For Biblical Living there. d Now check each and every file for a line that looks like: blacklist ath5k And just add a '#' character at the beginning of the line, thus commenting it. You might probably find this case on a file named 'madwifi'. 2.1) Alternatively, to quickly find where ath5k is being blacklisted, you can open a terminal (Applications/Accessories/Terminal) and type: grep -r 'ath5k' /etc/modprobe.d/ Just remember you need to just comment lines that have 'blacklist ath5k'.

This solution is based on this thread on the forums: If after all the above you see a network but cannot connect You might want to try changing the WPA Supplicant on your network manager to wext. On wicd it's the first option when you go into Preferences. If after everything you don't see your network Remember that you might be trying to connect to an access point that is not broadcasting its name (hidden SSID), which is a separate issue and can be checked by enabling SSID broadcast on the access point.

Manually installed drivers sudo lshw -C network I found the following things helpful: 1) (Synopsis: Add the following line: blacklist ath_pci to the /etc/modprobe.d/blacklist.conf file and reboot. If you are running an up-to-date Hardy, this should enable the free/libre ath5k driver.) 2) (Synopsis: 0.

Connect to wired network and install build-essential (sudo apt-get install build-essential) 1. Tar -zxvf madwifi-hal-0.10.5.6-current.tar.gz 3.

Cd madwifi-hal-0.10.5.6-r* 4. Sudo make install 6.

System ->Administration ->Hardware Drivers ->Uncheck both hal and Atheros support 7. Sudo vi /etc/modprobe.d/blacklist.conf ->blacklist ndiswrapper (Do this if you had tried ndiswrapper) This will download and install a non-free, binary-only driver for the atheros chipset. You need to rebuild and reinstall the driver every time you update your kernel. 3) The wireless LED on my laptop does not work in linux. I may have pressed the wireless button while troubleshooting and turned off wireless without knowing it. So while fiddling around, I may have installed the right driver but not known it.